Risk assessment is a multi-step process which, in conjunction with an
exposure assessment and other components, produces estimates of risk of an
adverse health effect occuring as a consequence of ingesting, inhaling and/or absorbing
one or more toxic substances. TCAS has produced many risk assessments over a period
of more than 28 years (additional information can be found in our case studies).
Toxicological Risk Assessment Components
In an exposure scenario, the expert toxicologist's role is primarily to address
"baseline risk." The illustration at right outlines the components of
a baseline risk assessment. This is an analysis of potential adverse health effects
(current or future) caused by the release of a toxic substance prior to remediation.
Aside from providing a scientifically credible projection of risks to human health,
the baseline risk assessment also contributes to the site characterization and assists
decision-makers in determining whether there is a need for remediation. It can also play an important
role in future property development plans which can be important considerations
in matters of litigation.
1. Data Collection and Evaluation
Data collection and evaluation is the process of gathering and analyzing
site data. It may also involve compilation of geophysical data and historical information
relevant to the release of toxic agent(s). The expert toxicologist must identify
the substances of potential significance present at the site, as these will be the focus of the risk assessment
2. Exposure Assessment
An exposure assessment estimates the magnitude, frequency and duration
of human exposures. It also defines the pathways by which humans are potentially
exposed. The results of an exposure assessment are a set of pathway-specific doses
(or inhalation levels) for current and future exposures to the substance(s) at issue.
The expert toxicologist must also develop reasonable estimates of exposure (dose)
with respect to current and future land-use assumptions. These estimates can play
an important role in determining whether a threat still exists. They can also assist
decision-makers with respect to assessing the potential for future exposures and
whether or not remediation is indicated.
3. Toxicity Assessment
A toxicity assessment addresses (a) the adverse health effects associated
with exposure, (b) the relationship between magnitude of exposure and adverse health
effects and (c) uncertainties such as the weight-of-evidence (WOE) of a chemical's
carcinogenicity in humans. This is frequently a two-step process consisting of (1)
hazard identification and (2) dose-response evaluation.
- Hazard identification essentially consists of research based on chemical-specific
toxicity studies and the prevailing body of generally-recognized, peer-reviewed
literature. The expert toxicologist assesses the nature and strength of causative
evidence to determine if a particular substance is capable of causing specific adverse
- The dose-response evaluation quantitatively evaluates the toxicity relationship
between dose and incidence of adverse health effects. From this the expert toxicologist
derives toxicity values which are subsequently used to assess the potential incidence
of adverse health effects at different exposure levels.
4. Risk Characterization
Risk characterization combines and summarizes the exposure and toxicity
assessments to produce baseline risk estimates. To produce a reliable baseline risk
assessment, the toxicologist must essentially compile a concise history of toxic
release events and exposures from a toxicological perspective. Typically, the expert
toxicologist presents his findings in both quantitative and qualitative statements
in the form of a written report. The report must disclose all findings and, in particular,
must credibly compare chemical-specific toxicity data against measured contaminant
exposure dose levels and exposure duration. The report also must estimate risk based
on fate and transport modeling to determine whether current and future exposure
levels may be of potential concern (based on the prevailing land-use assumptions).
Risk Assessment Methodology
A "methodology" (or unified set of methods) provides principles, rules
and guidance for producing results consistent with the application of specific investigative
procedures. It is important to keep in mind that the primary focus of a toxicological
risk assessment is human health. In keeping with this mandate, the expert
toxicologist must apply a specific set of methods to conduct a reliable
risk assessment. The U.S. EPA publishes in-depth risk assessment guidance1
and this methodology serves as the procedural basis for most risk assessments in
Procedural guidance is extremely useful in an evidential investigation. However,
objective scientific judgment also plays an important role. Only by strict attention
to detail can scientifically credible findings be produced. All toxicological conclusions
must meet the criteria for reasonable toxicological certainty. Thus, in
the course of producing a credible risk assessment, a number of potentially pivotal
issues may arise which, if not addressed in accordance with the generally-accepted
methodology, could lead to a report being challenged. The following paragraphs summarize
some of these issues.
The spirit of any risk assessment is to completely and factually provide full disclosure
of all relevant factors in a contamination scenario by applying generally-accepted,
peer-reviewed methods. Thus, selection of assessment method is just as important
as carrying out the analysis itself. The choice of method has the potential not
only to impact the results of a risk assessment but can also impact the scientific
credibility of the report. The expert toxicologist must, therefore, ensure
that all assessment methods are appropriate and consistent with the objectives of
accuracy and reliability.
For example, in most site-specific assessments, it is critically important to identify
and delineate locations which still contain residual contamination. These are typically
designated as Areas of Concern (AOCs). Within each AOC, there may be several
Areas of Investigation (AOIs) which delineate areas containing known contaminant
- Areas of Concern (AOCs) are regions in which contaminants have
been released to the environment or a waste management unit. When one or more chemicals
are released into the environment, a responsible assessment must do more than report
average contamination levels spread over a broad region. The assessment must also
establish the boundaries of impacted areas (typically delineated horizontally and
vertically). Since contamination can impact future land use and the surrounding
community, successful remediation relies on correctly identifying contaminated areas
and addressing them in compliance with regulatory guidance.
- Areas of Investigation (AOIs) represent zones within an Area
of Concern (AOC) in which measured chemical concentrations (through sampling or
monitoring) can be shown to exceed regulatory standards.
Areas of investigation are important because they identify and isolate specific
chemical concentrations. This has a relevant bearing on risk assessment. Failing
to identify AOIs in the exposure region can lead to erroneous and misleading
results. In the illustrations below (from an actual TCAS case), samples
were taken in a residential area to determine the extent of contamination.
In this example, samples which exceed regulatory limits were identified within each
AOI. It is thus possible to calculate the 95% UCL-AM (95 percent upper confidence
limit of the arithmetic mean) for each AOI. This method is valid for risk assessment
and helpful for remediation.[b]
In this example, levels exceeding regulatory limits were not identified and thus AOIs
were not defined. Averaging samples together merely dilutes the overall mean, producing
erroneous and misleading results. This method is useless for either risk assessment
In the first example, areas of investigation were defined and the results
compiled in a manner consistent with the spirit of the risk assessment;
i.e. a calculation of the 95% UCL-AM (95 percent upper confidence limit of the arithmetic
mean). This allows for correlation with cancer risk, slope factors, hazard index
and regulatory standards. This calculation is performed for each substance in every
AOI in which substance concentrations exceed regulatory levels. This is a valid
method because it is in every way consistent with prevailing Federal and State risk
assessment guidance (i.e. U.S. EPA, RAGS, RECAP, etc.).
In the second example, no individual areas of investigation (AOIs) were
defined. The assessment merely averaged all of the samples together. Diluted averages
present an unreliable assessment of localized concentrations. The underlying assumption
that diluted averages quantitatively represent AOIs under consideration for remediation
is erroneous. This approach invariably produces misleading results and is valid
only in cases where no regulatory exceedances are present in the sample data.
Cancer Risk Calculations
Cancer risk determinations are a key part of risk characterization. U.S. EPA publishes
detailed "Guidelines for Carcinogen Risk Assessment."2
However, the expert toxicologist must also consider additional guidance documents
and utilize the most recently-available information on target organ effects when assessing
cancer risks. New guidance is continually being published as new peer-reviewed studies
become part of the ever-growing body of toxicological literature. The expert
toxicologist should always address such guidance to ensure that information from studies
on carcinogenesis and other health effects are considered together in the overall
characterization of risk.
The expert toxicologist must be consistent in presenting cancer risk conclusions.
Cancer slope factors convert estimated daily intakes averaged over a lifetime of
exposure directly to an incremental risk of a person developing cancer. As a general
rule, average lifetime exposures should be used while all less-than-lifetime exposures
should be converted to equivalent lifetime values. Similarly, if a toxicity value
is based on average lifetime exposure (e.g., slope factors), then the exposure duration
should be expressed in the same manner. Thus, it is important to remember that the
variables in both the exposure assessment and the toxicity assessment should all
be based on the same underlying set of conversion factors.
Although the approach for estimating carcinogenic risk is based on the assumption
that a high dose received over a short period of time is equivalent to a corresponding
low dose spread over a lifetime, this approach becomes problematic as the exposures
in question become more intense but less frequent. This is especially true for confirmed
human carcinogens and/or when there is evidence that the agent has shown dose-related
carcinogenic effects. Therefore, the expert toxicologist may need to assess the
level of uncertainty associated with the exposure assessment for carcinogens. Both
U.S. EPA and WHO3 recommend that "...the discussion
of uncertainty should be included in both the exposure assessment and risk characterization
chapters of the risk assessment report."
For risk assessment purposes, it can generally be assumed that the dose-response
relationship will be linear in the low-dose portion of the multistage model dose-response
curve. U.S. EPA has stated that relatively low intakes (compared to those experienced
by test animals) tend to originate mainly from environmental exposures. However,
these assumptions may not hold true for all cases, particularly those involving
short-term or higher-dose exposures. Regulatory guidance on these topics is continually
being updated. The expert toxicologist should always review the most recent guidance
before settling upon a particular method for performing cancer risk calculations.
Although U.S. EPA publishes detailed information concerning "default" intake values for
a wide variety of circumstances, age groups, etc., some states have legislated their
own corrective action policies. Some of these policies provide specific guidelines
for exposure intake levels. For example, a person living in a coastal region may
consume greater quantities of shellfish than a person living in a land-locked state.
In such cases, certain "default" assumptions may exist with respect to
intake values. These may be further qualified by land use (whether an area is classified
for residential use, industrial use, etc.). In such cases, the expert toxicologist
will generally apply the default assumptions unless there are compelling reasons
to do otherwise. Additionally, the land use assumptions and source of intake values
applied in risk calculations must always be clearly defined as these serve to codify
and validate region-specific baseline risk conclusions.
It is important to bring historical factors to the forefront in a risk assessment.
Historical factors may have a direct and relevant bearing on remediation in a toxic
release scenario particularly in cases of chronic long-term exposures.
For example, if laboratory results of soil or water samples taken prior to a release
are available, comparison of these samples with more recent samples may have a direct
bearing on assessing risk. Such data can be used to demonstrate concentration decreases
or increases over time. Such data may also subsequently prove to be evidential if
Hill Factors in a causative investigation.
Standards of Admissibility
Risk assessment testimony is governed by the same rules of evidence as causation
and other scientific aspects of toxicology. In particular, toxicological testimony
cannot be considered admissible if the evidence is based upon a "novel"
scientific technique or methodology. Expert testimony must have its basis in reliable
scientific techniques which are generally accepted by the relevant scientific community.
The expert toxicologist's testimony must be responsive to answering the questions
at issue and rest on a sound, reliable scientific foundation (Rule 702, Federal
Rules of Evidence).4 Although personal observations
and professional experience may contribute to formulating an opinion, they do not
in themselves constitute an admissible basis for a conclusion and, if offered, must
be supported by "good science."
In conjunction with risk assessment, exposure assessments indicative of significant
human health risks can trigger the need for medical monitoring. Medical
monitoring is defined in legislation as "...periodic medical testing to screen
people at significant increased risk for disease." This is a specific
set of procedures5 defined by the Comprehensive Environmental
Response, Compensation, and Liability Act (CERCLA) or more commonly known as "Superfund."
The specific objective of Superfund is "...to clean up uncontrolled releases
of specified hazardous substances."
In the context of toxicology, risk assessment is recognized under the CERCLA statutes
environmental testing may serve as a marker for exposure based on risk. ATSDR
(the Agency for Toxic Substances and Disease Registry) has established criteria
to determine when medical monitoring is an appropriate health activity and the requirements
for establishing a medical monitoring program at a site:
"The primary criteria for medical monitoring should be documented evidence
of exposure of a population to a hazardous substance in the environment. An exposure
will be considered to be at a sufficient level if there is documentation of an increased
opportunity for exposure to a level that meets or exceeds some health-based comparison
value, such as Minimum Risk Levels (MRLs) or Reference Doses (RfDs), or that meets
or exceeds a level reported in the peer-reviewed literature to result in some adverse
health effect. Documentation is considered sufficient if it is from an exposure
assessment, environmental exposure modeling, or sampling from a general area (for
example, water samples from an aquifer or a town water supply). Documentation of
individual levels of exposure is not required. In cases in which exposures are unknown
or undocumented, environmental monitoring is a more appropriate initial activity."
"In areas where biological markers of exposure have not been collected, environmental
sampling can be used to estimate exposure levels. The target population of concern
is the population in which there is documented exposure at a sufficient level to
place the individuals in that population at significant increased risk for developing
some specific adverse health effect."
Medical monitoring is typically directed toward a target community identified as
being at "significant increased risk for disease" on the basis of its
exposure. This can involve small numbers of people or tens of thousands. Significant increased
risk will vary from site to site depending upon such factors as the potential
magnitude of harm of the specific outcome, the risk attributable to the exposure
or the presence of sensitive sub-populations.
Medical monitoring can be expensive and is frequently a matter of significant concern
in litigation. An experienced, objective toxicological assessment to determine if
there is a bona fide need for medical monitoring in compliance with the
CERCLA criteria is an absolutely essential component in environmental cases involving
a community or class of individuals.
A well-organized toxicological risk assessment reliably measures the likelihood
of adverse human health effects from a potential toxic exposure. It can also offer guidance
with respect to property remediation, disposition and future-use issues. The expert
toxicologist must pragmatically research contributing and historical factors, perform
the required dose and risk calculations in the proper order, professionally summarize the
results and communicate written findings in a scientifically-objective manner.
The benefits of an objective risk assessment produced in accordance with generally-accepted
guidelines (such as those published by U.S. EPA) are many. Aside from accurately
characterizing potential risk of adverse health effects, a well-constructed risk
assessment can be instrumental in assisting a judge and jury when making decisions
pertaining to remediation, medical monitoring, environmental monitoring, administration
and other matters at issue.
Notes and References
- U.S. Environmental Protection Agency, "Risk Assessment Guidance for Superfund, Volume
I, Human Health Evaluation Manual,"
- U.S. Environmental Protection Agency, "Guidelines for Carcinogen Risk
- World Health Organization, "Principles
and Methods for the Risk Assessment of Chemicals in Food,"
- Federal Rules of Evidence, "Rule
702. Testimony by Expert Witnesses," Cornell University Law School, 2011
- Agency for Toxic Substances and Disease Registry, "ATSDR's Final Criteria
for Determining the Appropriateness of a Medical Monitoring Program Under CERCLA,"
Federal Register, 1995 Jul 28;60 FR 38840-44.
- Graphical image adapted from U.S. EPA, "Risk Assessment Guidance for Superfund,"
- TCAS report demonstrative (redacted), graphical image © Copyright 2017 TCAS, LLC.
- TCAS report demonstrative (redacted), graphical image © Copyright 2017 TCAS, LLC.